2007-05-27 02:52:09 · 11 answers · asked by Swoppy 1 in Cars & Transportation ➔ Car Makes ➔ GMC
dude turn your ignition to the on position but don't start the car
wait 5 seconds then fully press and release the accelerator pedal 3 times within 10 seconds
2007-05-27 02:56:26 · answer #1 · answered by yukk3l 2 · 1⤊ 0⤋
After you have changed the oil, turn the key to on, but do not start, and put the gas pedal to the floor 3 times. That should reset the light. If not, try running through the options on your system information scanner to see if there is a "reset" option there, if there is, once you get it on screen press and hold the button for 10 seconds.
Do not disconnect the battery. (Unless of course you want to enhance my tow business, because doing so will sometimes reset the security system and it won't start.)
2007-05-27 02:58:17 · answer #2 · answered by oklatom 7 · 0⤊ 0⤋
with key in the on position quickly depress the gas pedal 5 times then start the engine. should reset the change oil light. worked well for gmc Yukon, should work for your grand am.
2007-05-27 02:56:49 · answer #3 · answered by Tony C 1 · 0⤊ 0⤋
Get an oil change ... the light resets when the filter is changed.
2007-05-27 03:00:39 · answer #4 · answered by Anonymous · 0⤊ 1⤋
Change the oil. by the way, your screen name is swoopy. Is that swoopy as in the host from the scepticality podcast.
2007-05-27 02:56:25 · answer #5 · answered by idog 2 · 0⤊ 1⤋
Put oil in your engine, It should go out.
Take a dummy course on how to take care of your car.
2007-05-27 02:56:10 · answer #6 · answered by eviechatter 6 · 0⤊ 2⤋
have your oil changed
2007-05-27 02:54:05 · answer #7 · answered by aabigaa2 5 · 0⤊ 1⤋
try disconnecting the battery for 5minutes or go to auto zone
assuming you've already changed your oil
2007-05-27 02:54:35 · answer #8 · answered by Todd C 4 · 0⤊ 2⤋
CHANGE YOUR OIL
2007-05-27 02:54:06 · answer #9 · answered by tabulator32 6 · 0⤊ 1⤋
have an oil change.......
2007-05-27 03:43:11 · answer #10 · answered by slyone 2 · 0⤊ 0⤋