I have a classic switchblade and it wont close. Help.
I already tried pushing the button and pulling it down. and i've messed with the little knob thing that goes up and down.
2007-05-20 18:39:49 · 8 answers · asked by Voodoo Kid 2 in Sports ➔ Outdoor Recreation ➔ Hunting
You, have a Classic Switch Blade assuming on the style that I think it is on the front of the knife there should be a finger guard I believe when you are holding your knife it's on the left side or could be the right side either way press down (the direction opposite the way the blade opened) in a sliding motion holding the handle that is the blade release. The little nob thing is the safety so your knife doesn't go off in your pocket up is locked. This is hard to explain with out seeing exactly which knife you have.
2007-05-20 19:13:08 · answer #1 · answered by Rambo 3 · 3⤊ 0⤋
Try talkblade.com or Bladetalk.com. One designer of a particular switchblade is on line most of the time and has much experience in this area.
They are blogs out there just for this purpose. You can get "Kits" that you can assemble but be wary of the state you live in. Illinois does not allow anything so be careful. You take a risk ordering anything that May be prohibited in the States. You wont be refunded any money. You can spend anywhere from 12 bucks to 2 thousand for a custom switchblade. Another place to try is mikovknives.com. Good luck
2007-05-23 12:57:49 · answer #2 · answered by Ret. Sgt. 7 · 0⤊ 0⤋
specific, if the blade is under 2 inches, you may carry a switchblade. criminal as pie. the different component to word is which you will legally have any switchblade you want AT homestead. those regulations pertain to carrying & transporting in automobiles. At house is positive.
2016-12-29 16:30:26 · answer #3 · answered by Anonymous · 0⤊ 0⤋
Swivel the front bolster clockwise without turning the back stationary bolsters.
This will push back the spine of the blade thus releasing it.
For more information check out my website or call me at 877-5-KNIVES.
Good Luck!
The Knives4Wholesale Team
2007-05-22 17:41:17 · answer #4 · answered by knives4wholesale 1 · 0⤊ 0⤋
Well, on the bright side, you can now carry it legally just about anywhere, LOL!
Seriously, now, just use a dremel to cut the ends off of those tiny pins on the sides, then GENTLY work a thin prying tool underneath the scales. Don't pry hard in just one spot. Pry gently in several spots, on both sides of the knife. Once they're out, you can take the knife apart to see how it works, and repair/replace the offending part. As for the pins, you might be able to obtain replacements through smoky mtn. knife works.
You might also be able to send it to the factory it came from to be repaired, but you'll want to make sure that it's legal to own where you live, or you'll never get it back!
2007-05-20 19:24:58 · answer #5 · answered by Anonymous · 0⤊ 3⤋
Go to my 360 page and scroll thru the pictures i have there, tell me what style of switchblade you have as compared to my collection i posted there, and i can help you further with your issue.
2007-05-20 20:24:30 · answer #6 · answered by boker_magnum 6 · 0⤊ 1⤋
Knives4Wholesale is 100% correct.
I'm a collector myself and REAL stilettos made from Italy usually Maniago... close in this fashion.
BTW, they have GREAT prices.
2007-05-22 17:45:25 · answer #7 · answered by judys2lips 2 · 0⤊ 0⤋
you broke it there is nothing you can do if you messed with the knob on it now its a fixed blade you should be really careful with that
2007-05-20 18:46:34 · answer #8 · answered by al 6 · 0⤊ 6⤋