I need the speaker wiring diagram for a 99 ford contour cd player with a square plug ( not rectangle)?

Question

My factory stereo was a tape player. I have a factory cd player made for the same car. I know which wires go to each speaker, but the plug on the cd player is square, and there is no indication for the wires. I tried to figure it out but know luck. The wires coming out of the cd player are Blue, Purple w/ White stripe, Brown, White w/ Red stripe, Yellow, Blue w/ Black stripe, White w/ Orange stripe, and Green. I tried to match top to bottom as well as side by side. I can here the radio but it is snowy and static. Any one know? Please tell me.

The cd player is made by altec electronica model number 98bb-18c815-aa

Answer 1

Your vehicle is equipped with a factory amplifier. The square plug contains the input wires for the amplifier.

If you open your glove box door all the way, you'll see the factory amp behind the glove box. The large plug at the factory amplifier contains your vehicle's speaker wires.

Answer 2

get a wiring kit, they cause them to for almost each and every form of vehicle. this might make it ordinary and there is not any could desire to cut back up the production unit wiring. yet an option selection is to get a provider handbook. you may get greater suited solutions in case you clarify the precise difficulty. Do you no longer understand what twine is going the place? you additionally can take your vehicle to a close-by vehicle stereo installer for help.

Answer 3

did you plug the antenna back in? it's easy to miss it if it falls back in the dash... it's the one that goes in the plug shaped like a hole.

if you did plug the antenna in you might want to look up your car on metra's website (they make the aftermarket wiring harnesses)
http://www.metraonline.com/index.php

Answer 4

you could always go back to ford and ask them for alittle help on what wires go where

Answer 5

.