When I try to run my Wireless setup Wizard, it starts but evry SSID i put in is said to be invalid. how do I solve this problem? I can't go to http://192.168.0.1. It doesn't work for some reason.
2007-05-18 22:45:05 · 2 answers · asked by Reagus 2 in Computers & Internet ➔ Computer Networking
Assuming your NIC card works, it sounds like the cable between your PC and your router is defective OR not connected properly. Your Cable / DSL modem connects to the WAN port on the router. Your PC connects to any of the LAN ports.
Switch the cables and try to go to http://192.168.0.1, if you connect, replace the cable now connected to the WAN port.
If not, the router may be defective.
2007-05-18 23:10:27 · answer #1 · answered by ELfaGeek 7 · 1⤊ 0⤋
Ensure that your lan settings are off
Internet explorer > tools > internet options > lan settings ensure all are unchecked
reboot
try again
if not try firefox
use a cable for setup not wireless
if in doubt reset the router ( switch on back that you hold in with a pin)
try a program network magic
diagnose with a program called netstumbler
It is not out ot the possibilties that you have a neighhbour with a similar route beaming out a signal with the same ssid and default channel ( 6) interferrring with you
2007-05-19 16:27:15 · answer #2 · answered by billys_office 5 · 0⤊ 0⤋