Use a soft wet cloth and a bit of metal polish like Cif. Rub in the direction of the grinding grooves with slight pressure.
2007-05-18 14:58:33
·
answer #1
·
answered by heartsonfire 6
·
1⤊
0⤋
most probably, the moister is getting trapped between the knife blade and the handle. You stick it in the block and the moisture wicks down, and there is little air flow in a knife block.
So, leave them layed out on a cloth for a few hours before you put them in the block.
But, to remove the rust take a little steel wool and some soap to them. It will come right off.
2007-05-18 20:24:35
·
answer #2
·
answered by Greg L 5
·
0⤊
1⤋
Nothing to worry about except appearance. They are probably not stainless or are in inferior type of stainless and so spot. Dry them with a towel after washing should stop the spotting. Rubbing with steel wool will remove the spots.
2007-05-18 20:24:15
·
answer #3
·
answered by Anonymous
·
0⤊
1⤋
everyone is saying to use Brillo pads and steel wool, that will leave them full of scratches and take the shine off.
just cut up an onion with the knives, Ive tried it on all my knifes and it works great!!
2007-05-19 06:37:51
·
answer #4
·
answered by daniel m 4
·
0⤊
0⤋
Brillo pads
2007-05-22 17:41:20
·
answer #5
·
answered by purple cow77 2
·
0⤊
0⤋
salt and lemon juice. If they are cheap, dry them after washing, they have inferior plating. steel wool will scratch.
2007-05-19 05:41:10
·
answer #6
·
answered by joopster8505 3
·
0⤊
0⤋
use brillo pads,they must be made of steel to rust after you wash them make sure that you dry them well after you always wash them
2007-05-18 20:58:11
·
answer #7
·
answered by thomasl 6
·
0⤊
2⤋
steel wool and some soap & Lemon juice will take it off.
2007-05-18 20:27:31
·
answer #8
·
answered by night_shift101 2
·
0⤊
1⤋
Lemon juice will take it off.
2007-05-18 20:25:27
·
answer #9
·
answered by chicken 3
·
1⤊
0⤋
bite the rust off
2007-05-18 20:29:04
·
answer #10
·
answered by Anonymous
·
0⤊
2⤋