2007-05-16 15:06:26 · 20 answers · asked by Jim H 1 in Environment ➔ Other - Environment
Screw it towards the left and take out old one or one you want to change. Then take new one (if you have it) then carefully screw towards the right but don't turn to much or you might break the bulb off the metal bottom part.
2007-05-16 15:09:08 · answer #1 · answered by Jimbo 2 · 1⤊ 0⤋
First, make sure the light is not turned on.
Second, turn the light bulb to the left until it detaches from the unit.
Third, wait until you receive your free light bulb from Yahoo! by having a best answer.
Fourth, put said light bulb up against the inside of the unit and turn it to the right until it is securely in place. Be careful not to over tighten.
2007-05-16 16:20:26 · answer #2 · answered by Miranda 3 · 1⤊ 0⤋
Ok, first make sure the light bulb is turned off and not hot. Then, take hold of your old lightbulb, and screw it to the left. Then you remove it from the socket, and replace it with a Compact Flourescent Lightbulb by putting it in place, and then turning it slowly to the right to lock it back into place of the socket. However, don't turn it TOO hard or force it to twist back, just gently turn it so that it stays in place without jiggling (if you turn it too much, it will break the next time you try to replace it or else break the unit). Finally, flick the lightswitch that activates it to make sure that your new CFL Light works properly. Also, make sure you get the right brightness of light, and not one that is too light or too dark.
2007-05-16 17:23:05 · answer #3 · answered by Anonymous · 0⤊ 0⤋
unplug lamp, or turn off power to the fixture, then unscrew (normally turn to your left...) the light bulb careful not to harm the glass so it doesn't break, and set it aside. than take a new lightbulb, and put it in the socket the old one came out of. twist is carefully to the right so that it is tight,... BUT NOT TOO TIGHT! you don't want to get it stuck in the socket because then it will break the next time you need to change the bulb. No fun, trust me. To dispose of the old light bulb, put it into a sack, (Plastic) and tie it tight,... and throw away... lol... helpful? I hope so! good luck
2007-05-16 16:01:43 · answer #4 · answered by Neonkttie 3 · 0⤊ 0⤋
Walk outside the room. Call for an orderly. Have him put you back in your straighjacket and have him change the light bulb.
2007-05-17 08:08:07 · answer #5 · answered by Adam 4 · 0⤊ 0⤋
Hi. Remove the old incandescent one using the instructions in answer #1. Replace with an energy efficient bulb.
2007-05-16 15:12:02 · answer #6 · answered by Cirric 7 · 0⤊ 0⤋
First you call as many really strong people as you can to help you. Then you hold the new bulb in place and have all of your helpers spin the building until the bulb is snuggly in place.
2007-05-16 17:39:34 · answer #7 · answered by michael c 2 · 0⤊ 0⤋
Turn off the power first so you don't get killed. Grab the light bulb and turn it gently counter-clockwise until it comes out. Then place the new one in the socket and turn it clockwise until you can't turn it anymore. Turn on the power, and the room will be filled with ambient energy.
2007-05-16 15:25:23 · answer #8 · answered by hamburglar 2 · 1⤊ 0⤋
twist it's aluminum neck to the left until it is loose and replace it with a new one by re-twisting it to the right.then punish the broken bulb for blacking out by drawing a creepy spider on it's face with a permanent marker.
2007-05-16 18:13:58 · answer #9 · answered by polly-pocket 5 · 1⤊ 0⤋
Use gloves and yank the old one out of the socket then superglue the new one onto the fixture.
2007-05-16 18:02:09 · answer #10 · answered by Dean * 4 · 1⤊ 0⤋