2007-05-13 19:00:23 · 4 answers · asked by bulbot 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
Is your coolant low? Does the Blower Motor still work? Is your Heater Core clogged? Did you blow a fuse? Are the controls working properly? These are some of the causes
2007-05-13 19:04:52 · answer #1 · answered by tturbod2001 4 · 0⤊ 0⤋
That's not much to go by. First, if the gage shows the engine is running normal and the blower is blowing, then the problem is the heater core is clogged. Take the hoses off the core,(carefully, you may have to split the ends with a knife and peal them off) and use a garden hose to flush it out. This is quite common when the cooling system goes too long with out being flushed and changed. other than that, it would be the blend air door not working.
2007-05-14 09:20:37 · answer #2 · answered by Jackolantern 7 · 0⤊ 0⤋
It is most likely due to your heating coil being out or leaking...a few ways to determine this is if there is condensation on the inside of the windshield or if the actuall fan just doesnt turn to blow. also check what is referd to the blender door.
The heater coil is located in side the dash on the pasenger side of the vehicle. You may have to take it in for diagnostic testing...or if your handy with a wrench...just pick up the manuel for your year and make and try to fix it your self...you might save money.
2007-05-14 07:38:54 · answer #3 · answered by Andie 2 · 0⤊ 0⤋
Have electrics checked if all fine could Just have broke may need a new one good luck :)
2007-05-14 02:05:53 · answer #4 · answered by clare w 4 · 0⤊ 0⤋