Description: VIA AC'97 Enhanced Audio (WAVE)
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1106&DEV_3059&SUBSYS_A0021458&REV_50
Manufacturer ID: 1
Product ID: 100
Type: WDM
Driver Name: viaudio.sys
Driver Version: 5.12.0001.3513 (English)
Driver Attributes: Final Retail
WHQL Logo'd: Yes
Date and Size: 9/10/2001 00:30:00, 42880 bytes
Other Files:
Driver Provider: VIA Technologies, Inc.
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 48000, 48000
Static/Strm HW Mix Bufs: 1, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: Failure at step 19 (User verification of software): HRESULT = 0x00000000
2007-05-11 02:47:13 · 5 answers · asked by Anonymous in Computers & Internet ➔ Software
Hello Paddy.
Please don't use the Realtek drivers. It's not a Realtek chipset...and don't use the VT Vinyl Drivers for 1617 (right company, wrong controller - it has to be for Southbridge according to your HardID). They did paste a comprehensive install from the readme file which you can use with VIA 82xx controller.
Upon reading your information (thank you for the details - that helps) the following accurate information can be determined (the important stuff):
VEN_1106 is the vendor number of VIA Technologies Inc.
DEV_3059 is the device number of AC97 Enhanced Audio Controller (chip VT8233/33A/8235/8237/8251)
Therefore you require the AC97 Enhanced Audio Controller for that array of sound device chipsets from VIA Arena in the link source I've attached.
Download the package, expand it, then have your Windows Add New Hardware... look in the folder where you unzipped the files (or follow the instructions pasted by the last answer)
Hope this helps...
2007-05-11 03:06:52 · answer #1 · answered by Alan with an Eh 5 · 0⤊ 0⤋
The updated driver version was 6.14.01.4150 at http://www.viaarena.com/defaul...atID=1010&SubCatID=100
VIA Vinyl Audio Driver for VT1617
Try opening the Recording Properties for your audio device and sliding all recording input levels to the lowest setting (0).
Also try selecting Stereo or Mono Mix as the Recording device instead of Line-In or Microphone
Also see the forum below:
http://forums.viaarena.com/messageview.aspx?catid=17&threadid=70769&enterthread=y
For detailed instructions see
http://downloads.viaarena.com/drivers/audio/ComboAudio_A1u390aReadMe.txt8) Windows 2000/XP/2003 Driver
=========================
== Driver Installation ==
=========================
a) Automatic Installation
Decompress the zip folder and type
D:> SETUP.EXE (where D equals the location of the setup file)
in the run command prompt or double click the setup.exe file. Select "Install".
After the system reboots, the driver will be installed completely.
b) Manual Installation
Under Device Manager, "PCI Audio Multimedia Device" will be displayed if
the "VIA AC97 PCI (Enhanced) Audio Device" is detected by the PCI enumerator.
Set the source destination directory to the "\WIN2000", where the "VIA AC97
PCI (Enhanced) Audio Device" installation file for the Win2000, VINYL97.INF,
is located.
After the selection, the "VIA AC97 PCI (Enhanced) Audio Device" will be installed
successfully.
2007-05-11 02:59:35 · answer #2 · answered by essbebe 6 · 0⤊ 0⤋
Go to the website of the manufacturer of your computer (assuming the sound device came with the PC). Look up your make and model and the correct driver will be available there. If they have more than one, and you can not guess which you need, download them all. Try to install, and if it is not the right one, you will get a "Device not found error" and it will not install. They you try the next. (Rare to have more then 3 or 4 to try).
2007-05-11 02:53:02 · answer #3 · answered by dewcoons 7 · 0⤊ 0⤋
Its the Realtek 97' sound driver. Semi-easily found by searching. It's free...so don't get inticed by the sites needing anything else.
2007-05-11 02:53:11 · answer #4 · answered by Jared W 2 · 0⤊ 0⤋
on the beginning up bypass to u r administration panel elect "Sound and Audio units" in spite of if it quite is no longer beginning or giving some errors then carry on with those steps i'm doing conformation approximately u r concern. initially Sound and Audio units(on top of issues Panel)all concepts are disabled in spite of if that's then bypass forward ........... in case you waiting to take/get carry of "Intel(R) convey Installer" Then get carry of it IN that u gets "Sigmatel* Audio motive force" n u do no longer could installation or concern approximately something merely get carry of this "Intel(R) convey Installer" application n run it it quite is going to provide u 2 concepts a million)installation Drivers n 2)installation application u could elect a million) selection in that back it quite is going to coach a million)motive force selection n 2) application selection u could placed verify on Sigmatel* Audio motive force n click on "installation Now" button although bypass to regulate panel n This time All concepts Are ENABLED IN "Sound and Audio units" ....do required Settings what you like. as nicely All this there's a million application Named "GetBackData NTFS" If u r waiting to get carry of it u can get better u r deleted sound motive force folder as nicely ok n tell ME in spite of if it works OR no longer the two +ve n -ve solutions are WELCOME wish this might help!!
2016-10-15 09:10:23 · answer #5 · answered by lishego 4 · 0⤊ 0⤋