My left lockout hub has to be locked and unlocked with a tire iron, the other one i can turn with my hand. It's the 22RE 4cyl 2.4L model. The 4WD works great but it's a ***** to turn that hub to get into it.
2007-05-08 16:24:21 · 4 answers · asked by skyline44512 3 in Cars & Transportation ➔ Car Makes ➔ Toyota
Might be a problem with the grease gumming up in the hub--run across that before. Pull the hub apart, clean out good and regrease with a synthetic grease of matching quality---should work much better. Paul
2007-05-08 16:32:03 · answer #1 · answered by paul h 7 · 0⤊ 0⤋
If you know what it is take it to an auto mechanic, using a tire iron may damage:
suspension or steering components
front end may need alignment
front brakes may need replacement
wheel bearings
2007-05-08 16:33:11 · answer #2 · answered by Firedogfire 3 · 0⤊ 0⤋
You need to replace the clutch and spring inside that hub cover. see the right side to install properly. the spring goes one way. good luck.
2007-05-08 16:48:36 · answer #3 · answered by mr. mash 1 · 0⤊ 0⤋
Grease the hub with molly grease then put it back together.
2007-05-08 16:32:43 · answer #4 · answered by Teacher 6 · 0⤊ 0⤋