I don't want to run them in during normal use, but somehow optimise them for normal use. Stiffness didn't seem to be a problem with the old unsealed bearing systems, because they could easily be optimised, with patience!
2007-05-08 07:43:33 · 7 answers · asked by NikkoRacer 1 in Sports ➔ Cycling
Get the ol oil can out or WD40
2007-05-08 07:48:30 · answer #1 · answered by Jewel 6 · 0⤊ 0⤋
Bearings with seals on always have a little initial friction due to seal tightness. You would be best to perhaps remove the inner most seal as this points to inside the hub so no chance of dirt ingress.
2007-05-08 14:49:43 · answer #2 · answered by Anonymous · 0⤊ 0⤋
I've also heard of people packing their bearings temporarily with rubbing compound. That wears off the rough spots more quickly. A bit messy, though.
2007-05-11 09:25:47 · answer #3 · answered by cachorrodemudanca 1 · 0⤊ 0⤋
Well, I hate to break it to you, but the only way to 'loosen' them is to use them. New sealed bearings will always present friction. Keep them lubed, and put some miles in. It's the only way.
2007-05-08 14:58:43 · answer #4 · answered by MadMonkey 5 · 1⤊ 0⤋
use bearing grease, its cheap and will last longer than wd40 or other products not designed for bearings
2007-05-08 14:51:59 · answer #5 · answered by jason a 3 · 1⤊ 0⤋
Ride 'em.
2007-05-08 15:13:24 · answer #6 · answered by Jay P 7 · 1⤊ 0⤋
butter or marg
2007-05-08 14:49:29 · answer #7 · answered by Anonymous · 0⤊ 0⤋