i got error msg, file\i386\\ntkrlmp.exe cant be loaded wen i tried to install winxp,, any clue or idea tnx!!!!

Question

I have tried to install XP in my new hard disk but I allways get the
message that the file \i386\ntkrnlmp.exe can't be loaded. I have not
the faintest idea of what is it due to, since I have tested all my
hardware, even the RAM modules, in another computer and they work just
fine.

Maybe the problem is in the mainboard? This is an INTEL ROCK LAGE PERL
865

In my second hard disk I had XP (and well, I hope it is still there)
but now it doesn't boot, and when I try to format this HD I get the
same error message: the file \i386\ntkrnlmp.exe can't be loaded error 7...

Any clue?

regards

Answer 1

http://support.microsoft.com/kb/318729

Answer 2

SYMPTOMS
During the text-mode portion of Windows Setup, Setup may stop responding (hang) and you may receive one of the following error messages:
The file I386\Ntkrnlmp.exe could not be loaded. The error code is 7.
-or-
The file I386\L_intl.nlf could not be loaded. The error code is 7.
As a result, you cannot install Windows.
Back to the top

CAUSE
This behavior can occur if either one of the following conditions is true: • There are incorrect settings in the computer's basic input/output system (BIOS) configuration.

-or-
• One or more of the random access memory (RAM) modules that is installed on the computer is faulty.

Back to the top

RESOLUTION
To troubleshoot and resolve this behavior, use the method that is appropriate to your situation.
Back to the top

Method 1: Restore the Default BIOS Settings
WARNING: This procedure may involve changing the computer's complementary metal oxide semiconductor (CMOS) settings and altering the computer's BIOS. Incorrect changes to the BIOS of your computer can result in serious problems. Change the computer's CMOS settings at your own risk.

To resolve this behavior, restore the computer's BIOS to its default settings. For information about the correct BIOS settings for the computer and about how to check and change these settings, see the computer documentation or contact the manufacturer of the computer.

Additionally, to confirm that the computer's BIOS is current, contact the computer manufacturer to inquire about the latest BIOS update that is available for the computer.
Back to the top

Method 2: Remove the Faulty RAM
To resolve this behavior, remove the memory modules that are installed in the computer.

NOTE: You must leave enough RAM for the computer to start and run Windows.

For additional information about the amount of RAM that is required to run Windows, click the article number below to view the article in the Microsoft Knowledge Base:
304297 (http://support.microsoft.com/kb/304297/EN-US/) System Requirements for Microsoft Windows Operating Systems
If the error message that is described in the "Symptoms" section of this article is displayed again after you remove the memory module, remove a different memory module. This procedure may require you to restart your computer several times to identify the specific memory module that is not working correctly.

For information about how to add and remove RAM to the computer, either contact the manufacturer of the computer or view the documentation that is included with your computer.

Answer 3

I agree with alot of your ideas (they're really good). The idea of having more realism in the game sounds refreshing. I was getting so bored/annoyed of the cartoonish Sims 2, they should really "step up" the game play in the Sims 3 as you have already mentioned in your ideas. You should really send in your ideas to EA! I think alot of Sim fan/players will agree with your ideas. * I really hope that they continue to refine the Sims 3 instead of leaving it the way it is now. <:(

Answer 4

contact your computer engineer.