I have my left reverse light out on my 1994 Dodge Ram 1500 and I bought a replacement bulb. How do I install it?
2007-05-05 06:18:50 · 3 answers · asked by blakefabian2003 4 in Cars & Transportation ➔ Car Makes ➔ Dodge
Lower the tailgate, and on the vertical surface next to the light there are 2 Phillips screws. Remove these screws, pry out a little ways and pull straight back on the whole assembly. The lower bulb is the backup light. Twist the receptacle out, pull out the old and put in the new bulb. Make yourself a note. If the taillight or brake light does not work, pull the assembly and put the backup light bulb in its place. They are the same bulb. If it is the taillight out the backup light will still work.
2007-05-05 16:03:02 · answer #1 · answered by eferrell01 7 · 0⤊ 0⤋
i own a shop and you might be able to remove the Len's on this one other wise remove the screws that hold the tail light assembly in,and when it comes out remove the bulb for the reverse light on it,and its that simple,be sure and don't over tighten the screws when you put them back in,and that's it your done,good luck hope this helps.
2007-05-05 06:25:37 · answer #2 · answered by dodge man 7 · 0⤊ 0⤋
go to autozone they will put it in for free
2007-05-05 06:23:47 · answer #3 · answered by dafusel 1 · 0⤊ 0⤋