Smith & Wesson makes, or made one at one time that chambered 9mm using moon clips. I think taurus still makes one in the Tracker series, I wouldnt swear to it tho.
2007-04-30 14:35:39
·
answer #1
·
answered by boker_magnum 6
·
0⤊
0⤋
I'm looking for one too.
They pop up every now and again at guns shops and shows.
Smith and Wesson made the 547 and 940
Ruger had the Sp-101 in 9mm, the security six, and blackhawk conversion cylinders as mentioned before.
Taurus made the model 905
All are now discontinued but can be found sometimes.
I think the S&W 940 and Ruger Sp-101 are both great and will pick up the next one I find for a fair price.
BOUND: The multicaliber revolver your talking about was called the Medusa
Pretty neat gun; also discontinued I believe
Check out he below link to an article Popular Mechanics did on it:
www.popularmechanics.com/outdoors/sports/1277301.html
2007-05-02 09:23:40
·
answer #2
·
answered by beavizard 3
·
0⤊
0⤋
Bound's hubby here:
As mentioned, Ruger has made at least two 9mm revolvers and Smith & Wesson has made at least the Model 940 (a 9mm Centennial). However, it appears as though many people have forgotten that the original Colt Manufacturing Company (before it went belly-up) designed and marketed a 9mm revolver based off the Commando. This particular revolver was more a WTSHTF revolver that chambered for about 20 different versions of the 9mm cartridge. Conceptually, this would be an ideal revolver to own. [If anybody remembers the actual name of this particular Colt revolver, I hope they would share it!]
Have a great day!
2007-04-30 17:26:53
·
answer #3
·
answered by Anonymous
·
0⤊
0⤋
I don't believe any major manufacture makes a 9mm revolver any longer.
Smith & Wesson made the 940, a five shot, J-frame, snubby.
Ruger made a 9mm in the Security Six series, also a snubby.
Taurus made one years ago, but no longer offer it.
Ruger also made a Blackhawk single action revolver with a 9mm cylinder. They don't anymore.
You will have to find the gun on the used gun market. The S&W is pricey, the last one I saw on auction arms went for aboiut $900. I haven't seen the Ruger version in years, a rare gun.
Good luck.
2007-04-30 16:15:03
·
answer #4
·
answered by Anonymous
·
1⤊
0⤋
i hit upon there's a mild distinction with extra draw back with a revolver because of a smaller body. besides the indisputable fact that, a 9mm or .38 is a really solid high quality with a lot less draw back that packs a punch. both the 9mm and .38 calibers provide +P rounds if the weapon your capturing demands +P ammo. Taurus and Smith&Wesson are a thanks to bypass contained in the revolver branch, and that i might want to point both the Taurus or Beretta in 9mm semi-vehicles.
2016-12-05 03:36:47
·
answer #5
·
answered by ? 3
·
0⤊
0⤋
There might be a few, mostly older models chambered in 9mm, certainly not very many.
9mm is an autoloader rimless cartridge. It can't be fired in a revolver without moon clips. Same goes for .45ACP though it is a popular chambering for a revolver.
Why not try something different, I'd get bored just owning tons of guns all chambered for the same round.
Just get a .357 magnum or .38 from Taurus, cheap and a very underrated company.
2007-04-30 17:07:48
·
answer #6
·
answered by Anonymous
·
0⤊
0⤋
Sure. Ruger does. They make a snubbie that shoots .9mms loaded in moon clips and they make a Blackhawk cylinder chambered for .9mm which you can change out with the .357 cylinder. Of course, they are going to want you to send the revolver in to be fitted if you didn't buy it with the two cylinders to begin with.
H
2007-04-30 14:43:34
·
answer #7
·
answered by H 7
·
0⤊
0⤋
Know what? I like all those guns, and I want a 9mm revolver too! What R the odds of that?
2007-05-01 20:43:41
·
answer #8
·
answered by Brian V 5
·
0⤊
0⤋
Taurus, Smith & Wesson, and Ruger have all made 9mm revolvers. They all to my knowledge have discontinued them though.
2007-04-30 16:01:58
·
answer #9
·
answered by Anonymous
·
0⤊
0⤋
Bound,
That multi-caliber pistol you were thinking about was called the Medusa.
After Colt went under, another company (I can't remember the name, but they made bored through cylinders to fit to cap-and-ball revolvers.) licensed the rights and they to promptly went belly up. Seems like it might be a snake-bit project.
2007-05-03 19:23:23
·
answer #10
·
answered by Doc Hudson 7
·
0⤊
0⤋