Whenever I prototype, I do it the easiest way possible. Some of my wires are longer than they need to be. Now I have a job interview soon, and I'm going to have to prototype during the interview. Is it important that my wires stay close to the breadboard and not so many inches high?
2007-04-27 18:02:23 · 5 answers · asked by Anonymous in Science & Mathematics ➔ Engineering
Solderless breadboards can cause a number of problems, especially with faster modern circuits. See what Bob Pease has to say about them (follow the link).
2007-04-27 18:19:24 · answer #1 · answered by Joe 5 · 0⤊ 0⤋
The main purpose for breadboarding is to get the darn thing working and neatness usually doesn't count.
Just don't dress your wires in a manner where they will pick up stray radiation from other wiring and you should be OK. Most commercial breadboards have an assortment of jumper wires, so just try to be a bit neater than you would at home
Good luck...
2007-04-27 18:12:27 · answer #2 · answered by Anonymous · 0⤊ 0⤋
What's important is that your breadboard works. Yeah, it's nice to be a bit neat about it, but getting it to work is the most important part.
Doug
2007-04-27 19:00:42 · answer #3 · answered by doug_donaghue 7 · 0⤊ 0⤋
Wires should be as short as possible, know your baker, and keep the hell away from high-voltage sub-stations...
2007-04-30 10:15:04 · answer #4 · answered by Anonymous · 0⤊ 0⤋
I agree with the other two gents. All that matters is that it works. or when you first built it, why it didnt work and what you did to correct it. Good luck and relax!!
2007-04-27 19:21:37 · answer #5 · answered by John 5 · 0⤊ 0⤋