can i make a hydroelectric power model??how??

Answer 1

You will need a water reservoir, some form of turbine, and something connected to the turbine to represent a generator.

The water reservoir can be just about anything that can contain water at an elevation above that of your turbine. In the real world, this is usually a dam, so you may want to model something that looks like a dam.

Water from the elevated source is allowed to flow from the source past a water turbine. You could make a waterfall and paddlewheel so that people can see the workings, but in an actual generation station, this is a pipe and the turbine is enclosed.

The turbine turns as a result of the water flow. A generator is connected to the shaft of the turbine. You can use a permanent magnet motor for your generator. Just hook up a voltmeter to what would normally be the battery leads of the motor to show the voltage being generated. Chances are, your model won't be able to generate enough power to light a bulb, so showing the voltage with a voltmeter is a simple way of demonstrating the principle.

Answer 2

Hydroelectricity skill capacity (electrical energy) derived from a water-depending source (hydro). it really is the way it is going: a million) A dam is built, and water builds up in the back of it. 2) Water flows from in the back of the dam out the front, it really is decrease, by particular tunnels. 3) In those tunnels, the stress of the water spins turbines. 4) The turbines are linked to turbines 5) The turbines produce the capacity. There are different water-depending capacity schemes like wave action, yet dam/turbine/generator is through a thoughts the most person-pleasant source of hydroelectric capacity.