its in a 1990 ford 302. the motor IS NOT a H.O. engine.
2007-04-25 02:47:07 · 6 answers · asked by josh_ford_289 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Yes, but I sugest you build a sbc if you want a real motor.
2007-04-25 02:52:18 · answer #1 · answered by Country boy 2 · 0⤊ 4⤋
The roller cam and the roller rockers are a nice combination to reduce friction and improve top end power. They are not required together. The roller rockers will improve the top end by reducing the effective mass of the valve train (by reduceing the load on the push rod) and the roller cam will reduce overall friction (the roller lifters may actually weigh a little more than the flat lifters). It is a good compromise to use them together.
2007-04-25 09:15:06 · answer #2 · answered by a simple man 6 · 0⤊ 1⤋
Apples and oranges. Roller rockers can be used with any type of lifter for the most part.
Roller rockers and cams reduce friction. Some roller cams may require the use of roller rockers, check the spec sheets to get it right, but it's not an absolute.
2007-04-25 02:52:34 · answer #3 · answered by Bostonian In MO 7 · 1⤊ 0⤋
Roller rockers will work just fine.
2007-04-25 02:51:27 · answer #4 · answered by colglennlarson 3 · 0⤊ 0⤋
curler rockers could be put in on your engine with the final kit. then all you're able to desire to earnings is the thank you to suitable regulate them. crane cams makes a kit which will bolt on on your heads. you will would desire to get the kit and in the event that they dont comprise the instruction manual plates and hardend push rods you will would desire to get those to boot.
2016-11-27 19:30:12 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Yes they will work just fine.
2007-04-27 01:39:18 · answer #6 · answered by Anonymous · 0⤊ 0⤋