The clutch is sticking , it won't shift gears. Thanks
2007-04-22 08:29:38 · 2 answers · asked by Brilliant 1forHIM 5 in Cars & Transportation ➔ Motorcycles
Only had it for a couple of month's,It has about 3000 miles on it.
2007-04-22 08:31:56 · update #1
I just wanted to say thank you for making the time to answer my question, I appreciate it.
2007-04-22 12:40:34 · update #2
without all the details I will take a few liberties. I will assume that this failure happen all of a sudden, if this is the case either the clutch cable has broken or the clutch spring has broken. If this happened over time I would estimate that the clutch has gone out of adjustment at the cable sheath or in the trans. If the cable sheath lock nut has come loose you can roll back the rubber adjustment protector and check. if this is the problem just extend the sheath until the lever is no longer loose and get it to the dealership and have them perform a proper clutch adjustment. If it is in the trans the dealer should make this adjustment..... Good luck
2007-04-22 09:19:28 · answer #1 · answered by billjac 2 · 1⤊ 0⤋
The clutch needs to be adjusted, the clutch isnt disengaging far enough to let you shift cleanly. Do you have alot of slop at the clutch lever? there may be too much slack there, or you (or your mechanic) will have to adjust the clutch at the trany. It's no big deal really. If you have been riding it since you've noticed it , then you may need a new clutch pack by now from it slipping.
2007-04-22 09:07:22 · answer #2 · answered by Anonymous · 1⤊ 0⤋