2007-04-20 23:11:56 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
A disconnection of power will disable a radio. This is an anti-theft feature.
You should have been given a "radio code" when purchasing the vehicle. If you have it, consult the owner's manual on how to enter the code and re-activate your radio.
If you do not have the code, contact the Chrysler dealership or Chrysler's Consumer Affairs Dept, provide the VIN and they should be able to give you the code.
.
2007-04-21 00:18:11 · answer #1 · answered by brweldon81 2 · 2⤊ 0⤋
get the serial number off of the radio and call the dealer, they will give you a code to enter in the radio. Isnt it great how everything on a car is electronic now...... you cant even shut the car off without something going wrong! BS!!!
2007-04-21 08:26:20 · answer #2 · answered by Anonymous · 1⤊ 0⤋
Most often when you disconnect power in your vehicle for any length of time you have to reprogram your radio. Turn the radio off than on again , it may be set to a.m. you may have to reset to f.m. stations. If nothing when you turn off ,than on ,then possibly the fuse may have blown.Locate fuse box, radio fuse location should be listed with other components inside fuse cover.
2007-04-21 06:31:55 · answer #3 · answered by jim a 2 · 1⤊ 0⤋
You may have blown a fuse. Take a look at your owners manual to find the fuse location for the radio.
2007-04-21 06:15:58 · answer #4 · answered by Isaac 4 · 1⤊ 0⤋
the answer above me is correct but the worst case is you have to pull the radio and give them the serial number off of it as well as the vin number
2007-04-21 07:53:43 · answer #5 · answered by Christian 7 · 1⤊ 0⤋
See if your owner's manual tells you. Owner's manuals are available from http://www.helminc.com
2007-04-21 06:15:04 · answer #6 · answered by bobweb 7 · 1⤊ 0⤋