i have a 92 honda accord and wanted to know where would i plug the diognostics test wires onto the car. Is it in the car or under the hood where I do it?
2007-04-20 19:51:54 · 4 answers · asked by dev_welling 2 in Cars & Transportation ➔ Maintenance & Repairs
In 92, I was thinking they were still under the hood. It was around 96 when they started going under the dash, I believe. As for Honda, I'm guessing they did the same thing.
2007-04-20 19:57:01 · answer #1 · answered by Fordman 7 · 0⤊ 0⤋
You have an OBD-I vintage vehicle, and the computer itself may have a lamp on it that flashes the diagnostic error codes when you activate the diagnostic mode. Look behind the passenger side foot kick panel for the computer. All OBD-II vehicles have the diagnostic connector under the dash and steering wheel. Many American cars read the OBD-I codes out on the dash check engine light.
2007-04-20 23:47:13 · answer #2 · answered by bobweb 7 · 0⤊ 0⤋
The test port is located under the instrument panel, probably very close to the steering column. You might have to search around under there for a bit before finding it, but it's pretty obvious once you do.
2007-04-20 19:55:35 · answer #3 · answered by spmdrumbass 4 · 0⤊ 0⤋
SHOULD YOU DESIRE-TO : GO TO FACTORY HONDA WEBSITE...... THEY WILL HAVE FACTORY SPECIFIC QUESTIONS FOR YOU SUCH AS V I N YR ENGINE
ALL CARS ARE NOT BUILT THE SAME HONDAS ARE NOT JUST HONDAS GO TO THE WEBSITE AND YOU WILL BE A LOT HAPPIER WITH THE ANSWERS THEY GIVE TO YOU AND THEY WILL BE ACCURATE ALSO...
OR CALL CHRIS AT 702 234 7677 IF YOU GET NO ANSWER FOR WHAT YOU ARE LOOKING FOR
2007-04-20 20:46:56 · answer #4 · answered by Anonymous · 0⤊ 0⤋