I HAVE A 350 BUT ITS BEEN STROKED TO A 383 .
BUT I NEED HELP INSTALLING THE VACUUM LINES AND HOSES
WITH THESE..
WHERE DO I CONNECT =THE POWER BRAKE BOOSTER.
THE TRANSMISSIONS VACUUM MODULATOR?
THE DISTRIBUTORS VACUUM ADVANCE?
DO THEY ALL CONNECT TO THE CARBURATOR?
2007-04-20 14:14:23 · 4 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
i am using a 750cfm edelbrock performer carburator.
and i have a 1960 camaro z28
2007-04-20 14:40:10 · update #1
sorry i meant a 69 camaro .
2007-04-20 15:26:34 · update #2
The brake booster hose goes on the large "barb" fitting screwed directly into the manifold, either into the carburetor boss, or the manifold itself...
The modulator should be the bottom small barb on the base of the carburetor, or a branch barb on the brake booster fitting.
The distributor advance "must" be put on the upper/middle barb on the carburetor, ABOVE the throttle plates, as it only advances when you give it gas
2007-04-20 14:41:43 · answer #1 · answered by Michael B 6 · 0⤊ 0⤋
The power brake booster connects to the back on top of the intake manifold, trans modulator on the passenger side of the carb, vacuum advance on the carb to a slow vacuum line, the kind that creates more vacuum as you rev the engine, I forget the real name of the vacuum line.....
2007-04-20 14:38:16 · answer #2 · answered by Anonymous · 0⤊ 0⤋
Brake booster = Manifold Vacuum (big port on manifold with one or twolittle ports on the same tree)
vacuum Modulator = also manifold vacuum (pretty sure)
Vacuum advance = Carburator Ventury vacuum
2007-04-20 14:28:27 · answer #3 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
Go to the store and buy one.:)
2007-04-20 14:21:45 · answer #4 · answered by iknomiabcs 3 · 0⤊ 1⤋