the brake pedal stiffens and make air noises. It is hard to push the brake pedal in order to stop.
2007-04-18 14:49:51 · 5 answers · asked by volther t 2 in Cars & Transportation ➔ Maintenance & Repairs
You either have a bad vacuum hose going to the vacuum booster, or a bad diaphragm in the booster itself...if the hose is good, AND the plastic connector, then change the booster...
Engine runs rough at idle too, don't it...
2007-04-18 14:56:06 · answer #1 · answered by Michael B 6 · 0⤊ 0⤋
My 91 did that check the vacume line to the brake booster and the lil round thing it plugs into.
2007-04-18 21:55:04 · answer #2 · answered by HotRod 2 · 0⤊ 0⤋
Yup. Brake booster. the big round thing bolted to the firewall with the brake master cylinder bolted to it.
They are NOT REPAIRABLE!! Serious spring tension inside.
So don't try to take the two halves apart.
You can take the master cylinder off just fine.
And you can remove the booster from the firewall, just don't try to open it up.
2007-04-18 22:27:15 · answer #3 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
Brake Booster problems have this characteristic....and will most likely be your prob...
2007-04-18 21:53:35 · answer #4 · answered by RiverRat 5 · 0⤊ 0⤋
contact chrysler
2007-04-19 03:40:38 · answer #5 · answered by smokey 7 · 0⤊ 0⤋