English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

I replaced both sides and installed new brake shoes and had the drums turned at a parts store. If you did all this work how much would you charge the person? Just for the labor itself. Any help would be appriciated thank you.

2007-04-18 03:32:15 · 6 answers · asked by guitardan 5 in Cars & Transportation Maintenance & Repairs

6 answers

Depends on if you know the guy. Hypothetically, If you took it to a shop, they'd probably charged $333.42, hypothetically. Now, if my friend asked me to do it for him, I'd probably charge between $20 - $40 and a dinner, not including parts. Someone I don't know between $50 - $80. The difference between the low and high ends depends on how much of a pain in the *ss the brakes were.

2007-04-18 03:37:30 · answer #1 · answered by Anonymous · 2 0

If I am know-how your query competently your grasp cylinder is placed beneath the hood (normally at the firewall correct in entrance of the motive force.) As for the drum brakes at the rear wheels. Drum brakes are a mechanical brake that's managed with a sequence of springs. There is a small slave cylinder (approximately the dimensions of a roll of quarters) placed on the backside of the brake meeting. If they're wanting solving cross in your regional constituents apartment and verify to look in the event that they nonetheless have the rebuild package for them. If no longer you'll must uncover a entire alternative. The pads normally most effective must be converted if you're listening to a steel on steel scraping sound. This sound is triggered via a redundancy within the pad itself. When you start to listen to this you normally have a few hundred miles earlier than the pad itself wears to a factor to which the rivets that maintain it in combination start dressed in grooves into the drum. If the grooves get to deep you'll both must have the drum resurfaced or have it changed.

2016-09-05 16:22:38 · answer #2 · answered by calvani 4 · 0 0

$130 per wheel including the labor to machine the drums and lubricate/ readjust the parking brake. This is labor cost only, and does not include parts costs.

2007-04-18 03:45:17 · answer #3 · answered by bobweb 7 · 0 0

assuming you repacked the wheel bearings while you had it apart and assuming you waited while they turned the drums I would think 60 to 80.00 would be alot. not counting turning the drums changing the rear brakes and packing the drums could be completed in less than 2 hrs so that easily 40.00 per hour.

2007-04-18 03:58:14 · answer #4 · answered by hunting4junk 4 · 0 0

i charge $20 bucks per hour.

2007-04-18 03:35:39 · answer #5 · answered by robert s 5 · 0 0

Two cases of beer.

2007-04-18 05:00:26 · answer #6 · answered by Nomadd 7 · 0 0

fedest.com, questions and answers