but has fuel and fire. just turns over and floods
2007-04-15 10:03:40 · 5 answers · asked by michaelj44139 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
wires,cap/rotor all are new
2007-04-15 11:59:21 · update #1
Pickup coil in distributor is going bad.
2007-04-15 13:53:39 · answer #1 · answered by eferrell01 7 · 0⤊ 0⤋
Did you hook up the oil pressure sending unit? How about putting a wet gauge on it to see if it really doesn 't have pressure? Was the oil pressure relief valve disturbed during the rebuild? Is the oil pump drive mechanism connected properly? Unless it has no bearings installed, it ought to be one of the above. Unless, for some reason, there's no oil in the crankcase. Good luck.
2016-05-20 23:34:46 · answer #2 · answered by marti 3 · 0⤊ 0⤋
Replace the plug wires, cap and rotor button
2007-04-15 10:07:23 · answer #3 · answered by Cruiser 4 · 0⤊ 0⤋
either a wire has a bad spot or the cap is cracked. best way to tell is to start it up at night with no lights around and look for arcs around the engine. this is one way to tell a wayward spark. but that what it sounds like.
2007-04-15 16:27:32 · answer #4 · answered by Jecht 4 · 0⤊ 0⤋
Check the ignition coil, more than likely rusty and coming apart at the bottom. It is on the front of the motor on the right (passenger) side.
2007-04-16 15:55:23 · answer #5 · answered by cubbyrock1313 2 · 0⤊ 0⤋