I seen 2 different types at the store and was wondering which one to use.
2007-04-14 05:44:50 · 9 answers · asked by Anonymous in Cars & Transportation ➔ Car Makes ➔ Ford
there are many different ratings but use what it says in your manual or better yet what on the master cylinder cap It will be dot 3 or dot 4 they should not be mixed
2007-04-14 11:13:39 · answer #1 · answered by 51 6 · 0⤊ 0⤋
No, brake fluid ought to get replaced out after about 5 years, yet a number of it receives replaced once you bleed the brakes after a brake activity. Time is extra of an project than mileage on the fluid.
2016-12-04 00:46:00 · answer #2 · answered by troxell 4 · 0⤊ 0⤋
Department of Transportation #3 fluid or Super DOT#3. Do not use Dot 4 it is synethic and will require flushing the whole system. Low fluid in the resv. is a sign that the brake pads need to be inspected. Please have that done before you fill the resv.
2007-04-14 05:51:19 · answer #3 · answered by John Paul 7 · 1⤊ 1⤋
Every-body who just answered your question!! Dot(3) brake-Fluid,all good answers,or look in your Manual in back of Manual it should tell what-kind of Fluids to use.
2007-04-14 06:06:02 · answer #4 · answered by linem08 1 · 1⤊ 1⤋
dot 3 is the standard for nearly all vehicles. if you are still in doubt, call your local ford dealer, ask for service dept and ask a service advisor. they will tell you DOT 3 also.
2007-04-14 08:21:00 · answer #5 · answered by michael_oxgood 4 · 0⤊ 1⤋
DOT 3 BRAKE FLUID
2007-04-14 05:55:45 · answer #6 · answered by FORDever 4 · 1⤊ 1⤋
dot 3 covers just about everything
2007-04-14 05:48:18 · answer #7 · answered by jb 3 · 1⤊ 1⤋
dot3
dot stands for dept of transpertation
2007-04-14 10:47:10 · answer #8 · answered by Anonymous · 0⤊ 1⤋
The most expensive is the best.
2007-04-14 05:51:06 · answer #9 · answered by johndeereman 4 · 0⤊ 2⤋