I was wondering if anyone could recommend a product that will help keep the air in the tire.
2007-04-12 17:24:35 · 5 answers · asked by Anonymous in Cars & Transportation ➔ Motorcycles
That green slime stuff works pretty good. However, all products for this are designed for temporary use until you can get it fixed.
But honestly.. just get the tire fixed! It will be cheaper than filling it up with goo and having to deal with it all the time. Because it will go flat again until you get the hole patched!
2007-04-12 17:28:19 · answer #1 · answered by piemat 2 · 0⤊ 0⤋
Sounds like typical case of a bent rim. You may have to take the tire off and sand or grind the rim seal points smoother to get a good seal. Put it in a water test tank to see where it is leaking.
2007-04-13 00:56:52 · answer #2 · answered by Dusty 7 · 1⤊ 0⤋
If it is a two piece wheel there is an o ring in the center. It could be leaking there. A new o ring can be installed without taking the tire of the wheel.
2007-04-13 13:07:51 · answer #3 · answered by renpen 7 · 1⤊ 0⤋
Remove the valve stem and install an innertube.
2007-04-13 11:10:46 · answer #4 · answered by guardrailjim 7 · 0⤊ 0⤋
You need to find out why and fix it right, instead of doing a temp fix.
2007-04-14 17:26:24 · answer #5 · answered by Anonymous · 0⤊ 0⤋