Best method used to cut Kevlar...?

Question

for single ply, multi ply, and cured and uncured panels?

Not interested in destorying it, question has to do with manufaturing it into products...just wanted to clear that up.

Answer 1

Bullet Resistant Kevlar panels can be cut to shapes very easily using a Jig Saw with a (Knife Blade) or even a hand held (Utility Razor Blade). It is very important “not” to use high speed saws or blades with teeth on these panels. Using high speed saws can possibly injure the operator and damage the blade, and jigsaws blades with teeth will snag the Kevlar Fabric from which the panels are made making it difficult to cut.
http://www.armorco.com/shop/custom.asp?recid=4

http://www.shopmaninc.com/cutters.html

http://cableorganizer.com/greenlee/kevlar-cutter/

http://www.metrotek.com/c-shears.htm

hope i could help

Answer 2

If you don't get an answer on the Internet then try contacting a major Sail Manufacturer like North Sails

Answer 3

YOUR CHOICE
Use laser,
A bomb,
plasma,
Acetylene torch,
chainsaw,
Fluid jet ( Hydro fracture it).
Why do you wanna cut Kevlar people wear it so that you wont be able to cut thro.
Any way you seem 2 b more interested in reverse order best of luck.

Answer 4

Laser.

Answer 5

I have no idea, but yours is the best question I have seen today, good one.