I have a 1994 Geo Tracker. I have a AIWA CTX409 (is ISO/DIN compliant and conform to the ISO Wire Color Code standard if that makes a difference)head unit in. I want to put a Kenwood KDC-MPV619 in. Do I need to get a new reciever wire harness or would the old one be ok?? I don't know much about the car audio and such so annnny help would be greatly appreciated :).
2007-04-10 09:28:13 · 3 answers · asked by Anonymous in Cars & Transportation ➔ Car Audio
If an adapting wire harness was used to install the Aiwa, you can cut away the part of the harness that plugged into the back of the Aiwa radio and crimp or solder the Kenwood on instead. No need to purchase another harness; the wire colors should be the same.
2007-04-10 10:21:15 · answer #1 · answered by KaeZoo 7 · 1⤊ 0⤋
it seems your vehicle has a production unit amplifier. proper type sound structures in Toyota autos use a unmarried large plug on the top unit. Low-factor signals run from that plug to a production unit amplifier, positioned to the right of the glove field. you've 2 recommendations: a million. Use a Metra 70-8113 harness to keep the production unit amp contained in the device. it really is a robust determination once you're conserving the production unit audio device. This harness makes use of the RCA pre-outs on your after-marketplace head unit to provide a line-factor signal for the inventory amp. Your head unit's speaker outputs isn't used. 2. Use a Metra 70-8116 harness to avert the amp and connect the audio device on on your new head unit. that's wisely suitable once you're replacing the audio device. you ought to connect the harness to the output plug on the production unit amplifier, and run each and each of the wires to the top unit region.
2016-12-03 19:29:32 · answer #2 · answered by ? 4 · 0⤊ 0⤋
Go here for an adapter harness that plugs into the factory harness and wires up to the HU harness as well as an install kit http://www.metraonline.com
2007-04-10 09:36:34 · answer #3 · answered by Anonymous · 0⤊ 0⤋