i have tried several types of glue but the beads still keep falling off. they stick but if you touch they at all they start falling off. i can't get them to stay put.
2007-04-09 14:22:46 · 22 answers · asked by ssvictory6 1 in Games & Recreation ➔ Hobbies & Crafts
Try a hot glue gun...
2007-04-09 14:25:08 · answer #1 · answered by Anonymous · 0⤊ 0⤋
1
2017-01-22 06:15:24 · answer #2 · answered by ? 2 · 0⤊ 0⤋
The only thing that will really work is 5 min epoxy. It comes in two parts and you mix equal parts of each and use the glue quickly. It sets up in 5 minutes. It is totally strong in 24 hours. Your beads will not come off.
Other glues like hot melt and super glue are brittle and the beads will snap off with any pressure.
2007-04-09 15:49:03 · answer #3 · answered by rrambrose 3 · 0⤊ 0⤋
If you are planning to start on your woodworking project, this isn't something you should use, it's something that you would be insane not to. Go here https://tr.im/A5Gtg
Truth is, I've been a carpenter for almost 36 years, and I haven't found anything like this for less than 10's of thousands of dollars.
2016-05-02 07:46:12 · answer #4 · answered by ? 3 · 0⤊ 0⤋
I recommend cutting polyethylene trash bags so you can wrap your metal rails with the trash bag sections. Polyethylene does not glue well. I suspect that the wood glue will just pop off the polyethylene, making them reusable. You can use clear packing tape or blue painter's tape to attach the polyethylene to the metal.
2016-03-17 22:37:55 · answer #5 · answered by Anonymous · 0⤊ 0⤋
Unfortunately you've got two smooth surfaces there. You could try silicone, but then I think the "bed" of glue would show. How big are the holes in the beads? Is there any way you could pin them to the wood with pretty pins or small finish nails?
2007-04-09 14:26:36 · answer #6 · answered by Kacky 7 · 0⤊ 0⤋
I am not sure what you are trying to do, but a polyurethane glue like Gorilla Glue will surely make them stick. Just be sure to wear gloves and protect everything because Gorilla Glue will stain your skin and make a mess. It will also expand in size so take that into consideration.
2007-04-09 14:26:51 · answer #7 · answered by united9198 7 · 0⤊ 0⤋
I agree with h_brida.
E 6000 will be the best product for what you are doing.
It dries clear. It is very strong. At our bead store we use it all the time to adhere two very different materials together.
The glue does take 24 hours to fully dry but it sets in 10 min.
I love the product! I have used it for 8 eight years.
2007-04-10 14:01:57 · answer #8 · answered by z_bead 1 · 0⤊ 0⤋
When you first glue your beads to the wood and they have a little stick to them then try some clear gloss lacquer, or poly urethane to cover them and to put a top coat over them so they will have a clear coat over the whole thing.
2007-04-13 03:50:34 · answer #9 · answered by caramel_4u2000 1 · 0⤊ 0⤋
try glue that says cement glue ussually those wood glues dont work that well maybe try an adhesive caulk for wood you can find it at home depot.
2007-04-09 15:31:14 · answer #10 · answered by crazylady4666 1 · 0⤊ 0⤋
Well it will depend on the design you want on your stick. But I use a Peyote stitch that is tight around the stick and then I set it in place with a little crazy glue.
2007-04-12 11:52:27 · answer #11 · answered by barbara 2 · 0⤊ 0⤋