and all my fluids seem to be toped of and everything seems to be in order except the antifreeze someone put in it is the green stuff and the owners manual says to use dexcool
2007-04-09 13:31:26 · 4 answers · asked by Master Ninja J 2 in Cars & Transportation ➔ Other - Cars & Transportation
If the light is on, it believes there is a code there. Did you use the actual OBDII scanner or just do the jumpering thing?
You should be able to reset the codes so the light turns off. If the light comes back on, check the codes again and it should tell you what is wrong.
Just had P140 on mine and had to change one of the oxygen sensors. Unlikely it would be an antifreeze issue unless you are low and the engine is overheating. In that case there would be other signs.
2007-04-11 10:49:30 · answer #1 · answered by SteveN 7 · 0⤊ 0⤋
Put the scanner back on, go in the menu and choose "reset" which should turn out the light.
2007-04-09 14:35:57 · answer #2 · answered by oklatom 7 · 0⤊ 0⤋
Black electricians tape will hide that nasty old light for you. i don't think that you have to worry about the antifreeze, as most of the stuff now is universal.
2007-04-09 14:33:30 · answer #3 · answered by redd headd 7 · 0⤊ 0⤋
Probably automatically set at 100K, so get it reset.
2007-04-09 13:43:41 · answer #4 · answered by gdwrnch40 6 · 0⤊ 0⤋