How do you change the head light (just the bulb) in a 03 ford ranger?

Answer 1

Open up your hood and look at the plastic covering between thegap area between the grill and radiator support. At the ends their Might be a couple of plastic hinged acces panels, (my 95 Mustang and 96 Explorer both had them) if there is not the hinged access panels then you will have to access the lights from the engine side of the radiator support. You also might have to remove the batetry and the air cleaner box to get to them. You will need to unplug the lights, Once the lights are unplugged you will need to turn the black plastic locking mechanism and slide it off. Once the lock has been removed you can remove the bulb from the housing, you might have to wiggle the lights to get them to break loose, once the lights are out you can re-install the new bulbs, be careful to lineup the notches in the bulbs with the proper notches in the housing, then put the plastic locking nut back on and re-plug in the bulb.

Answer 2

go to the local ""auto supply dude"" and get the correct bulb and the info that you require --- most likely the composite headlamp will be screwed in from the top ( under the hood and in front of the radiator wall ..... )))) ..... open the hood and study the area and you will see how it is put together and how it comes apart....