English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

Reference my last question, my jeep is a 97 4.0ltr with quadra-trac, it will only drive in 4x4 mode, either hi or low, when olaced in the 'N' on the 4x4 shift stick the car is immobile, will not move or attempt to move, it revs as though no gear has been selected even though the auto box is selected in drive.
I originally thought it was gearbox problem, then, after reading previous answers was pointed toward transfer case, whatever that is, one answer stated this model was permenant 4x4 and does not have two wheel drive as an option..............
Any help would be most appreciated,

many thanks.

2007-04-07 08:24:25 · 5 answers · asked by ROBERT G 1 in Cars & Transportation Car Makes Jeep

5 answers

Quadra-Trac is full time 4WD there isn't a 2WD mode available. If you place the transfer case in Neutral it disconnects all transmission power from both front and rear axles. This position is used for towing the vehicle with all 4 wheels on the ground.

2007-04-07 08:30:47 · answer #1 · answered by Bill S 6 · 1 0

yes, you'll find that it is a permanent 4x4 [checked on Jeep's website], meaning you cannot select 2wd etc.

now from what i gather from the question - that the engine revs but no drive even tho the gearstick is in 'D' while the low/high stick is in 'N' - right? well the problem is obvious really,
the transfer box is basically an extra gearbox bolted on the existing one, which changes from low to high - (low gears for rough terrain, high for road use) the power from the engine goes thru the auto gearbox first then via the tranferbox spliting it to both axles. so by selecting N here ahs the same effect as selecting on the auto gearstick, i.e. you have disenaged 'drive' somewhere along the line.

like Bill S said, N on the transfer box is used if the vehicle was being towed

2007-04-07 08:52:49 · answer #2 · answered by The Quiet One 1 · 1 0

Easy , the "N" on the transfer box selector is the same as the "N" on the normal transmission selector. They both are neutral positions. The transfer one enables the vehicle to be towed without causing damage to the auto box. If all else fails...read the manual !

2007-04-10 05:11:58 · answer #3 · answered by cosmo 4 · 0 0

You made a mistake by buying a Jeep in the first place, it is a yank piece of crap.

2007-04-07 08:32:24 · answer #4 · answered by RRM 4 · 0 1

here's a link to them on ebay.

2007-04-07 08:30:51 · answer #5 · answered by dan m 2 · 0 0

fedest.com, questions and answers