Cannot get out factory radio.?

Question

Can someone tell me how to get the factory radio out of a 1996 Buick LeSabre. I can get the fake wooden panneling out but thats as far as i can get,

Answer 1

Removing the narrow fake woodgrain panel is the first step. The hidden screws are in the vents; pry out each of the vents and you'll find a screw inside the top of the vent opening. The entire panel across the length of the dash has to be removed, so all four screws have to come out of all four vents; plus other screws at the far end of the panel and above the glove box. Once all screws are removed, you have to set the parking brake, turn the key to "on", shift into a low gear and then pull the panel away. The radio is held in with screws under the dash panel. Good luck!

Answer 2

if there are 2 tiny holes on each side, one hole above the other, then you will need to go to walmart and get these metal prong things, forget their name, but their like $3 USD and u just slide them in till they click and then pull on both sides.

if u dont have the holes, then most likely behind everything it will be held in with screws. just be careful and try not to break anything. just remember if you do break something, the only thing left for you to do is give up, and slam a brick onto the gas peddle with the front of the car pointed either at a cliff or a big crowd of people. make sur eu hop out too. then if u get in trouble, just continuously do backflips. (note: dont stop for anything, until the cop or person leaves)

Answer 3

there are 4 holes on the side of the radio buy some release pins then stick them in there and pull it should slide right out

Answer 4

Buy a set of lock release pins.
Then it'll slide right out.

Answer 5

Go to 12volt.com