I have to change a rear break light on my 95 Corolla and am having dificulty getting the rear tail light assembly off to get at the bulb. I have taken off the 2 screws from the outside, and the one nut on the bolt from the inside of the trunk, but there are 2 clips on the side portion protruding into the trunk which I can't figure out how to remove. Any ideas?
2007-04-03 07:45:34 · 6 answers · asked by cormelmat 3 in Cars & Transportation ➔ Car Makes ➔ Toyota
The whole assembly has to come off to get at the bulb.
2007-04-03 07:54:42 · update #1
you should not need to remove the assembly. open the trunk and pull the cover away from the lamp assembly area. You will see the bulb housings. Twist and pull the housing for the failed bulb and replace the bulb. reverse the procedure and your done
2007-04-03 07:50:09 · answer #1 · answered by malemute1 4 · 0⤊ 0⤋
Doesn't the bulb holder just unscrew a little and pull out of the housing from inside the trunk?
2007-04-03 07:51:54 · answer #2 · answered by Mr. KnowItAll 7 · 0⤊ 0⤋
I very own a save, and picture this; There are 2 motives they are going to stop working. One is the fuse of direction, yet assuming you have checked this already, the brake mild change under the sprint, up on the brake pedal, might are transforming into out of adjustment, or is undesirable. 2d; The brake lighting fixtures are under pressure interior the path of the turn sign change, and it could bypass undesirable, for this reason you have no longer have been given any brake lighting fixtures. attempt this; Have a pal watch your brake lighting fixtures while you place your foot on the brake pedal. Press it down firmly, and on the comparable time flow the turn sign arm up & all the way down to ensure in the event that they arrive on or flash. you do no longer might desire to have the igniton activate to try this, so if its shorting out, it's going to make the lighting fixtures come on at some factors between the left & marvelous turn sign positions. in the event that they do come on, then you truly might desire to replace the turn sign change. If it truly isn't the perpetrator, then get under the sprint to ensure in case you have capability to the brake mild change, and if its sending capability to the brake lighting fixtures. no count if it truly is, then examine to be certain you have capability on the mild bulb sockets, and which you have floor on the sockets additionally. in case you do all of this, it provide help to understand what the priority is. happy to assist out, sturdy luck!!!
2016-11-25 23:37:49 · answer #3 · answered by herzog 4 · 0⤊ 0⤋
you should be able to slide the tail light out sideways away from the middle of the car. make sure the lens moves a little first some cars the tail lights are glude in with a rubber compond to seal them.
2007-04-03 08:07:18 · answer #4 · answered by jsn_ayers 4 · 0⤊ 0⤋
very confusing problem. try searching using yahoo or google. that could help!
2015-04-05 19:46:38 · answer #5 · answered by Jared 2 · 0⤊ 0⤋
My Idea..........Look in the manual - it'll tell you in there how to do it.
2007-04-03 08:22:37 · answer #6 · answered by Trevor h 6 · 0⤊ 0⤋