I have a 95 contour and my turn signal stopped working. THe emergency lights have worked for a while. Im guessing I need to replace the signal flasher, but im not sure where its located and how hard it is to get to and or remove? How about the switch? thanks
2007-03-29 08:51:09 · 3 answers · asked by Michael a 1 in Cars & Transportation ➔ Car Makes ➔ Ford
Just had this done in my '96 Contour.
The hazard flasher / turn signal control is in the steering column. It's a "wedge-shaped" piece that fits over the steering column and includes the left turn-stubbies and the hazard switch. It's about $150 from the dealer. You have to remove the bottom screws to undo the top and bottom cover, remove those, then it should slide right out from the top.
2007-03-29 15:21:27 · answer #1 · answered by Kasey C 7 · 1⤊ 0⤋
flasher relay is actually on the turn signal switch itself... biggest issue we have with them is actual issues with the turn signal switch themselves....
If I remember, the emergencys are controlled by the same relay as the turn
2007-03-29 13:55:02 · answer #2 · answered by gearbox 7 · 0⤊ 0⤋
i would check the bulbs first if their bad replace them , if not the blinker relay is in the fuse box , read the owners manual for location and which relay to replace.
2007-03-29 09:39:45 · answer #3 · answered by mac227@sbcglobal.net 3 · 0⤊ 1⤋