Is there a special socket/wrench I have to get to take the filter off,or tighten it up
2007-03-27 05:09:54 · 5 answers · asked by robert v 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
you have to tighten it up real good,they should have provided you with a new gasket for it,but if its tight it shouldn't leak on it,try re-tightening it,and see if that helps it,good luck with it.
2007-03-27 05:14:29 · answer #1 · answered by dodge man 7 · 0⤊ 0⤋
there should be a nut right on the top of the filter housing(a 13 mil if I'm not mistaken) just tighten it up a lil, if the problem still occurs you will have to change the filter again and replace the o-rings, the filter should come with new ones. note there is also an o-ring under the filter on some applications.
2007-03-30 17:39:04 · answer #2 · answered by snake 2 · 0⤊ 0⤋
Any filter wrench should do the job. Sounds like someone failed to lube the gasket before tightening the filter. Take the filter off and rub a little gun grease on the gasket and put it back on. You should be able to tighten it tight enough by hand.
2007-03-27 21:45:33 · answer #3 · answered by eferrell01 7 · 0⤊ 1⤋
You need a cummins fuel filter wench
2007-03-27 12:14:38 · answer #4 · answered by RONALD H 2 · 0⤊ 1⤋
You could need a new top I work at a Carquest store and we sell about 5 of them a month that would fit your truck
2007-03-27 20:27:13 · answer #5 · answered by croquetgod77 2 · 0⤊ 0⤋