My small round saw blade I use with my Dremel is worn out It's 1/2" round. + many tiny teeth. Help, I need it

Question

If anyone out there knows of the piece I'm describing please let me know. I use it with my Dremel but it may not be a Dremel part as it was given to me about 10 years ago. It will cut into wood about 1/4" of an inch and is very thin.

I hope someone can help.

With gratitude --

Rebecca

I have checked Home Depot and another local tool supplier without success. I hadn't thought of Sears (duh) and want to know if their rotary bits will work with my Dremel tools since I just bought their latest model, sadly at a much higher cost than Craftsman. Thanks for the ideas though. I will try local hobby shops.

Answer 1

call them or e-mail but here's one on this page I have not seen one for a while in the stores I hope this is what you need
found another site just could not stop

http://www.dremel.com/en-us/attachments-and-accessories/attachment-accessory-category.htm?H=188549

http://cgi.ebay.com/SAW-BLADE-1-1-4-High-Speed-Steel-4-DREMEL-new_W0QQitemZ200078165064QQcmdZViewItem

Answer 2

Home Depot and Lowes both carry the small blades. Should be able to change blades by taking out the screw on the end of the spindle that fits into the dremel.

Answer 3

Sorry I cannot help on that. I have been disabled for twenty years. The first ten years were so hard but the last ten have been better than ever. After a while, if you keep your faith, inch by inch, your life will change for the better. My new life is one that I only dreamed of and it is only because I put it all in God's hands.

Answer 4

check a hobby shop, it very well could be a dremel part, they make lots of different ends for them.

Answer 5

I think if any one had it, it would be Sears.