2007-03-25 18:58:38 · 3 answers · asked by Anonymous in Computers & Internet ➔ Computer Networking
connect using a crossover cable and make network ids like
first computer XXX.YYY.ZZZ.qqq ( eg. 192.168.1.1 ) subnet mask 255.255.255.0
second computer XXX.YYY.ZZZ.lll ( eg. 192.168.1.2) subnet 255.255.255.0
you should be able to connect
2007-03-25 19:05:47 · answer #1 · answered by Bhaskar 3 · 0⤊ 0⤋
Ok
Connect the lan cable betweek both the computers and:
step1: got network setting in control panel and open LAN by right clickin-goto properties.
step2.select internet protocol TCP/ip Properties
step3: select the following ip address
ip address for comp 1st: 192.168.0.1
ip address for comp2nd: 192.168.0.2
subnet mask same for both 255.255.255.0
Now restart both and the lan is active. Make sure the lan is enabled.
If you still have problems. disable the firewall in control panel.
2007-03-26 02:05:43 · answer #2 · answered by CM 2 · 0⤊ 0⤋
1)..see,,if you create an workgroup then you need to keep the workgroup name same in both of ur pc's.
2)...Give ip address of same in both the pcs eg:192.168.0.1 and 192.168.0.2;
3)...plus make a cross over cable connection between your computers..use cat 5 or 6 cable for that
bye
manabjyoti saikia
2007-03-26 02:12:37 · answer #3 · answered by Anonymous · 0⤊ 0⤋