2007-03-25 10:10:57 · 7 answers · asked by lov2nil2000 1 in Cars & Transportation ➔ Maintenance & Repairs
if your vehicle is a forign vehicle or one of the few older cars right hand thread on passenger side left hand thread on the drivers side
2007-03-25 10:18:22 · answer #1 · answered by dave h 1 · 0⤊ 0⤋
omg im a 12 yr old girl and i no how to change a tire.
1.loosen the lug nuts on the tire before you jack the car
2. jack up the car
3.completely undo the lug nts
4.take of the tire
5.put on a new tire
6.tighten the lugnuts
7.take the jack out from under the car there your ready to go
good enough instructions for you!!!!?
2007-03-25 17:17:58 · answer #2 · answered by holly _lawton 3 · 0⤊ 0⤋
Remove any kind of hub cap by prying it off or loosening hub cap lock, loosen lug nuts (but do not remove them yet), jack up the affected corner of the car (refer to owners manually jacking instructions), remove lug nuts, remove wheel from car, set replacement wheel and tire on wheel studs, reinstall wheel studs by hand, snug up wheel studs (but not tight yet) with proper tool, lower vehicle to the ground making sure all body parts are not under car or tire!, tighten lug nuts in proper sequence (see link) and to proper torque spec. , finally, reinstall hub cap. Everyone has to learn at some point. Do not be afraid to ask questions if you don't know how to do something. Better safe than sorry!
http://www.alldatapro.com/alldata/PRO~V53720189~C10859~R0~OD~N/0/34870081/56349755/56350277/56350278/34853741/56180732/34865428/34865475/34865499/79665537
2007-03-25 17:29:40 · answer #3 · answered by know da stuff 4 · 0⤊ 0⤋
the same way you change a front right, rear left and rear tire except you are on the front left side of the car!!!!
2007-03-25 17:15:23 · answer #4 · answered by jakerug89 2 · 0⤊ 0⤋
open boot...
get spanner that has a "L" shape.
get car jack..
loosen wheel nuts with spanner..
if too tight kick it down with your foot.
jack car up..
remove wheel bolts.
remove wheel
replace wheel
put one nut on wheel and tighten
put the other nut that is exactly 180 degrees from it on
continue until allbolts are on
lower car until tyre just hits the ground
tighten wheel nuts TIGHT
lower car completely
pack away tools
enjoy the rest of youre day
2007-03-25 17:17:34 · answer #5 · answered by Anonymous · 0⤊ 0⤋
same as the right. Loosen bolts/nuts, jack up car, take off bolts/nuts.
2007-03-25 17:14:25 · answer #6 · answered by ButwhatdoIno? 6 · 0⤊ 0⤋
This is the sadest queston ever!
2007-03-25 17:14:07 · answer #7 · answered by Anonymous · 0⤊ 0⤋