i drove a 89 toyota pick up truck...i crashed it and the front axel needs replaced and it needs a new fender....how much do you think this might cost.....cause i really like the truck....but i don't know if it is even worth fixing.....please help me
2007-03-25 09:48:39 · 6 answers · asked by Anonymous in Cars & Transportation ➔ Maintenance & Repairs
there are lots of 85-95 toyota pu trucks in the junk yard in the bay area, CA. I used to own a 88 toyota and I had to get a front spindle, disc, and brake assembly as well as a front fender and bumper and hood. All these parts, (pulled myself at U pull it.) cost me under 200 bucks. I put them on, and drove it for over 100k miles
good luck
2007-03-25 09:54:05 · answer #1 · answered by Hiro M 2 · 0⤊ 0⤋
If you love the truck and the motor is strong, then by all means fix it. A bumber can be picked up at a junkyard, but if it were me, I would replace the axel with a new one. Most likely replacing both front axels with new parts.
2007-03-25 09:57:37 · answer #2 · answered by pipi08_2000 7 · 0⤊ 0⤋
Go to a local junk yard the pick and pulls are the cheapest
but depending on how the rest of your truck is it may not be worth it
2007-03-25 09:55:18 · answer #3 · answered by Anonymous · 0⤊ 0⤋
"length" - is the incorrect question. If the present oil clear out is readable you s/b in a position to envision the particular product type on its cartridge. My suggestion is from my source - FILTERS: Oil clear out Absolute performance Oil clear out (EA15K51) [one million] Oil clear out MANN Oil clear out (ML1003) [one million] Replaces the Ea15k33, which will nonetheless artwork for this motor vehicle
2016-10-20 10:35:39 · answer #4 · answered by ? 4 · 0⤊ 0⤋
Try getting used parts for it.
2007-03-25 09:52:46 · answer #5 · answered by Anonymous · 0⤊ 0⤋
its not, criss cross it
2007-03-25 09:51:32 · answer #6 · answered by just hanging around 5 · 0⤊ 0⤋