I have a 240sx, not that it matters, but i just want to know if i have to cut up the tint into peices to avoid the defroster lines.
2007-03-25 09:35:36 · 6 answers · asked by 2pac4life 2 in Cars & Transportation ➔ Maintenance & Repairs
no you don't have to cut it up to put it on and yes you will be able to use the rear defrosters after its tinted as long as you don't cut the defroster lines or break a tab off the wires.
2007-03-25 09:45:57 · answer #1 · answered by Rusty R 3 · 0⤊ 0⤋
in case you're very stable with hand to eye coordination, use a razor and decrease strains between the rows of the defroster. Peel the tint utilising the edge of the razor and spray warm soapy water between the movie and the glass. do not peel back too confusing, or you would be able to wreck the defrost strains. enable the soapy water do the job. Be extra advantageous careful on the factor the place the defrost line is going from horizontal to vertical (this would nicely be a susceptible spot). the vast situation right this is in case you harm the defrost line, that's repairable, yet not worry-free to do and it does not look too stable. that's truly helpful to spend some extra advantageous funds and enable a expert do it. stable success! Greg
2016-11-23 15:05:10 · answer #2 · answered by Anonymous · 0⤊ 0⤋
It will work fine. That defroster won't put 1/10th as much heat on that tint as sunlight will. The tint will probably help a little by keeping the heat in some.
2007-03-25 09:47:48 · answer #3 · answered by Nomadd 7 · 0⤊ 0⤋
No. The defroster doesn't generate that much heat. The tinting will get hotter from the sun than from the defroster.
2007-03-25 09:44:15 · answer #4 · answered by rcmit 2 · 0⤊ 1⤋
yes but wait a couple of weeks if you used quality tint there will be no problem using your rear defroster
2007-03-25 09:44:14 · answer #5 · answered by Anonymous · 0⤊ 0⤋
yes you can.
I have a tinted window and I have rear defrosters.
2007-03-25 09:43:53 · answer #6 · answered by Anonymous · 0⤊ 0⤋