2007-03-25 04:11:29 · 9 answers · asked by malachi b 1 in Computers & Internet ➔ Hardware ➔ Desktops
Pull the floppy disk out of your floppy drive when you boot the PC.
2007-03-25 04:14:19 · answer #1 · answered by SnowXNinja 3 · 0⤊ 1⤋
Depends. There are two types of disk. +(plus) and - (minus) and these are for formats.
The invalid system disk is if you were trying to play a Mac game disk in a PC game computer. The wrong type of disk.
So to fix it, sometimes you can not. You would have had to fix it before the disk itself was finished formatting when copying the info on the disk itself.
In other words, if you were trying to copy back up disks and did not let the system finish validating them. Then when you try to load up the back up files you may get a invalid system disk or even wrong files.
You did not state the nature of the disk too.
2007-03-25 04:17:26 · answer #2 · answered by Big C 6 · 0⤊ 2⤋
relies upon. There are 2 kinds of disk. +(plus) and - (minus) and those are for formats. The invalid kit disk is that in case you have been attempting to play a Mac interest disk in a computing gadget interest computing gadget. the incorrect style of disk. with the factor to repair it, in specific circumstances you would be able to't. think of ofyou've have been given had to repair it till now the disk itself replaced into complete formatting on a similar time as copying the information on the disk itself. in diverse words, in case you have been attempting to duplicate shrink back up disks and did not enable the kit end validating them. Then as quickly as you're attempting to load up the shrink back up documents you will desire to get a invalid kit disk or maybe incorrect documents. you in all risk did not state the character of the disk too.
2016-11-23 14:23:39 · answer #3 · answered by ? 4 · 0⤊ 0⤋
It could say that if the disk had failed or
something overwrote the first block on the disk.
Try booting off the installation media to see if you
can see the disk. If not, you'll end up buying a new
disk and re-installing.
Otherwise, you'll end up "repairing" - all of which
depends very much on which OS you are using.
2007-03-25 04:15:06 · answer #4 · answered by Elana 7 · 0⤊ 1⤋
You haven't given us much to go on, and obviously everyone has a different opinion. Your best bet is probably to have your machine serviced by someone who can look at the registry information directly. Support.com can fix your computer remotely (via your internet connection) and is only $29.
2007-03-26 06:56:41 · answer #5 · answered by Big Larry 2 · 0⤊ 0⤋
Your hard drive is most likely dead, dieing, has corrupted sectors, or a combination of all three. You'll probably need to replace it & restore using your recovery discs. To know for sure, you can download Drive Fitness Test from Hitachi http://www.hitachigst.com/hdd/support/download.htm & use that to test your hard drive. Otherwise, you could take it into your local PC retailer/repair shop & have diagnostics run on it.
2007-03-25 04:22:16 · answer #6 · answered by anthos620 4 · 0⤊ 0⤋
Maybe run a system recovery, it should fix it.
2007-03-25 04:15:43 · answer #7 · answered by matthew B 2 · 0⤊ 2⤋
when does it say that? Startup? after the windows desktop comes up?
2007-03-25 04:14:37 · answer #8 · answered by Anonymous · 0⤊ 1⤋
check your floopy, if there is a diskette, have that remove, and your should be good to go
2007-03-25 08:43:58 · answer #9 · answered by ViNDiCaTeD 2 · 0⤊ 0⤋