It looks really, really tricky and probably expensive.
http://www.fieldlines.com/story/2005/1/5/51211/79555
2007-03-23 14:45:09
·
answer #1
·
answered by Thuja M 3
·
0⤊
0⤋
(L)
Solar panels, continued
UV resistance
Glass in solar panels
Plexiglas in solar panels
Solar panel backing and sides
The benefits of long screws
Planning the panel wiring - series and parallel connections
Voltage and distance to the battery
Panel arrays and connections
Panel size and shape
Connecting solar cells
Choose and inspect the cells carefully
Preparing the tab ribbon
Flux
Soldering
Soldering tips
Soldering technique
Types of solder
Building a solar panel
Materials and tools
Figuring panel output
Calculate the number of cells you will need
Plan the panel layoutTable of contents
Building a solar panel, continued
Over-all panel length
Over-all panel width
Bar stock length
Cut the tab ribbon
Prepare the tab ribbon
Tinning
Crimp the tab ribbon
Attach the tab ribbon to the cells
Pre-tabbed cells
Make a layout template
Solder the cells together
Prepare the panel structure
Attach the screen
Place the cells on the panel
Attach the tab ribbons to the bus ribbons
Insulate the bus connectors
Junction box
Test the panel
Seal the panel
A small solar panel array project
Solar II project specifications
Panel layout and dimensionsTable of contents
Panel construction details
Panel backing
Cutting the Plexiglas
Drilling the Plexiglas
Drill Plexiglas, backing and sidebars together
Output holes
Attach sidebars to backing
Attach screen to backing
Junction box
Tab and bus ribbon
Coating interior panel parts
Cell preparation
Tab ribbon length
Soldering tab ribbon to the cells
Cell layout template boards
String construction
Plexiglas cover
Panel clips
Purchasing and working with solar cells
Off-spec or cosmetically blemished solar cells
Repairing solar cells
Creating cell fingers
Using broken solar cellsTable of contents
Making tab and bus ribbon
Tinning the cut foil
Other options for connecting cells
Encapsulants
De-aerate the silicone
Cutting the silicone
Solar electric system
Charge controllers
Cables and connectors
Batteries
Mounting panels
Solar panel location
Orientation
Panel maintenance
Appendix
Tools and materials
Suppliers
Other titles of interest
2007-03-23 18:27:08
·
answer #2
·
answered by Julia R 5
·
0⤊
0⤋
Buy an old window. Buy a large piece of copper the size of the window. Buy enough copper pipes and fittings to form an "S" pattern in the rectangle formed by the copper base plate. Spray paint all the copper pieces black. Sandwich the pipes between the glass facing the sun, and the copper panel as the backing. Run water through the pipes with a small pump. This is a very crude (probably tiny) solar hot water heater.
2007-03-30 17:20:05
·
answer #3
·
answered by DW2020 5
·
0⤊
0⤋
You really can't build your own solar cells, you have to buy them. $70 won't buy many, but you could make a very low power panel with $70 worth of solar cells. It would probably be cheaper to just buy a commercial unit though. Like the one in the source.
2007-03-23 15:34:10
·
answer #4
·
answered by campbelp2002 7
·
0⤊
0⤋
Take your 70 dollars to a store that sells solar panels. Buy the kit that says some assembly required. Thats it. Good luck.
2007-03-23 16:49:07
·
answer #5
·
answered by thorian 2
·
0⤊
0⤋
Go outside and lie in the sun. You are a solar panel. Now go spend the $70 on beer.
2007-03-29 07:18:19
·
answer #6
·
answered by TC 3
·
1⤊
1⤋
Simple: google 'how to make a homemade solar panel' and be prepared to spend ome cash, although the investment could save you a lot in the future.
2007-03-23 14:36:24
·
answer #7
·
answered by slamsam1221 2
·
0⤊
0⤋
*Get cheap solar cells
*Get tools
*Plan your solar panel system carefully
*Wire the cheap solar panel system
*You’re done!
2016-05-17 22:31:10
·
answer #8
·
answered by Ram 2
·
0⤊
0⤋