my trusty benq pb6200 projector is acting up. after replacing the lamp (properly) all three LEDs blink yellow, the fan is on, but no image and none of the buttons seems to function. any ideas? is there a way to hard reset?
http://www.amazon.com/BenQ-PB6200-DLP-Video-Projector/dp/B00021OQFC
2007-03-22 04:32:37 · 1 answers · asked by Anonymous in Consumer Electronics ➔ Home Theater
Did you use the instruction manual to replace the lamp.I would start again .Turn every thing off .Disconnect the power cord.Unplug the cables from the projector. Replace the lamp checking you are doing everything right.After the lamp has been replaced reconnect all the cables first .Have the system on and ready to go .Put the power cable back into the wall socket and switch on (Very Important:Do This Last).
See how you go. Sometimes things happen for no particular reason .I hope it works!
Regards,Rob.
2007-03-22 21:00:43 · answer #1 · answered by ROBERT P 7 · 0⤊ 0⤋