instruction book for vcr - national nv-g7 - does not seem to work
2007-03-21 17:33:35 · 4 answers · asked by Anonymous in Consumer Electronics ➔ TVs
DO YOU HAVE A CABLE BOX? IF SO,YOU HAVE TO HOOK THE CABLE BOX TO THE VCR TO UN-SCRAMBLE THE CABLE CHANNELS.
2007-03-21 17:40:37 · answer #1 · answered by mchaz60 6 · 0⤊ 0⤋
Best way to hook-up the vcr is to take the audio/video out jacks from the vcr and connect them to the video(1) audio/video in jacks to your tv. If you are using a cable converter box, you can run the audio/video out jacks from it to the audio/video inputs of the vcr to record programs, or else run the cable through the vcr to tv. If you have a cable box, this needs to be the first to be connected to the cable from the wall. Good luck, hope this helps.
2007-03-21 20:28:30 · answer #2 · answered by scott p 6 · 0⤊ 0⤋
well if your connected via coax cable, and your trying on channel 3 you may want to turn the vcr and tv to channel 4. On older tv's the tunners sometimes go out and you just need another channel. If that won't work use composite cabels (red, white, yellow that come with dvd players)
2007-03-21 17:39:34 · answer #3 · answered by phantom57212 3 · 0⤊ 0⤋
Your antenna is generating a sign too susceptible for the brink of your new television. you prefer a clean or extra effective antenna or a plenty extra effective television. do not purchase a television that no person has heard of that could be a deadly mistake.
2016-10-19 07:49:44 · answer #4 · answered by ? 4 · 0⤊ 0⤋