I had problems with the transmission disengaging over 30mph. It would go into gears fine and run great at lower speeds.
I had 3 sensors out on the car; camshaft position sensor, speed sensor and the range sensor. I have replaced the speed sensor and the range sensor.
Drove the car 50+ miles yesterday after replacing the sensors and the transmission didn't act up once. The CEL came back on with the camshaft position sensor.
Today, camshaft position sensor is no longer showing up, and both range sensor and speed sensor are showing up on diagnostic. The car is disengaging at over 40mph now.
WHAT is going on?
2007-03-21 07:44:07 · 2 answers · asked by yupp 1 in Cars & Transportation ➔ Car Makes ➔ Ford
708 (range sensor) & 720 (speed sensor). Which I replaced both.
As for replacing the Camshaft position sensor - I am having trouble finding the sensor locally. The one on the car is about 2 1/2x bigger than the one the autopart stores have.
2007-03-21 07:57:51 · update #1
What were the codes? I noticed you did not change the CPS .You should change it .
2007-03-21 07:53:23 · answer #1 · answered by (A) 7 · 0⤊ 0⤋
hi, change the trany fluid and filter. those sensors are dirt sensitive and causing false intermittent code errors.
2007-03-21 15:26:57 · answer #2 · answered by charlie 5 · 0⤊ 1⤋