English Deutsch Français Italiano Español Português 繁體中文 Bahasa Indonesia Tiếng Việt ภาษาไทย
All categories

4 answers

First find the schrader valve, similair to a tire valve stem, on the fuel rail on top of the motor. Remove the cap off of it and have someone turn the key on for a few seconds, then off again. Use a small punch or something to depress the stem in the valve, it would be a good idea to hold a rag tightly around the valve and base of the punch to ensure that gas doesn't spew everywhere, especially in your eyes. This will bleed or purge the air from the system. Just repeat the process until you get no air at the valve and only a good steady spray of fuel. The car should start right up now.

Good Luck!
Here is a good photo of one...
http://www.fordf150.net/photos/data/3118/1159shrader_valve_closeup.jpg

2007-03-20 12:06:44 · answer #1 · answered by John Boy 4 · 1 0

Cycle the key a 2-3 times keeping the key on for 5 seconds each time. that will do it.

2007-03-21 16:27:57 · answer #2 · answered by brokylm3 1 · 0 1

Turn the key off and on a few times

2007-03-20 12:17:12 · answer #3 · answered by kayef57 5 · 1 1

jus turn they key untill it starts and it will reprssurize it

2007-03-20 12:08:51 · answer #4 · answered by lurch 1 · 1 1

fedest.com, questions and answers