2007-03-19 13:39:16 · 2 answers · asked by makleigh_4 1 in Cars & Transportation ➔ Car Makes ➔ Dodge
OK, on this question..when they did the diag. machine on it there were two codes that showed up, p1391 which is glow plugs and I don't have a diesel durango, the other was for the camshaft sensor. Will replacing the sensor fix both problems that showed up? The glow plug one is something in the control/ignition module. I'm kinda confused on that!!!
2007-03-20 03:11:33 · update #1
if you have a 4.7L eng it is on the right cyl head front of the head on the right side kind of in a tight spot but not hard to replace if you have a 5.2L or 5.9L it is in the distributor aka pickup plate not hard to replace either remove cap and rotor and it lifts out hope this helps
2007-03-20 01:04:27 · answer #1 · answered by choclab 2 · 0⤊ 0⤋
It should be located at the front of the block near where the cam ends.You may have to move some things out of the way to get to it.Purchase the new one so you know what it will look like.
2007-03-19 19:00:23 · answer #2 · answered by tturbod2001 4 · 0⤊ 0⤋