I have a 1990 toyota camry windows will not work all of them don't I changed all the fuses under the hood and under the steering wheels
2007-03-18 16:50:40 · 7 answers · asked by Asim A 1 in Cars & Transportation ➔ Car Makes ➔ Toyota
My cars windows would only work from the driver's switch. The terminals on the window lock switch were corroded. Cleaned the terminals, and everything works.
2007-03-18 17:03:38 · answer #1 · answered by srena 5 · 0⤊ 0⤋
The two major parts to look at are the master window switch, and the wiring between the driver side door and the body. The early ninety cars have a bad tendency to break there.
2007-03-18 19:01:29 · answer #2 · answered by tacomatrdbkk 2 · 0⤊ 0⤋
Get a Haynes Repair Manual at the local Auto Zone or auto parts store in your area. It will troubleshoot and show you how to fix your vehicle. Also on the Auto Zone site has a section for vehicle maintenance
But if need be taking the panel off is one way to get to the switch.http://www.autozone.com/servlet/UiBroker?ForwardPage=/az/cds/en_us/0900823d/80/13/fc/be/0900823d8013fcbe.jsp
The Harnes has a wiring diagram too. Very nice to trace wires.
2007-03-18 17:25:58 · answer #3 · answered by Big C 6 · 0⤊ 0⤋
common problem was broken wires between the door and the body ,over time the wires would brake .from the harness moving back and forth in most cases can be repaired .
2007-03-19 13:07:00 · answer #4 · answered by Anonymous · 0⤊ 0⤋
it might be and easy fix jest check you fuses they most likely are somewere under the driver side under the dashboard
2007-03-18 16:56:30 · answer #5 · answered by gluke91 1 · 0⤊ 0⤋
it may be the fuse, yet once you have those days locked your keys in the vehicle, it may be by way of fact the guy who unlocked it with the two a hanger or gadget did it incorrect and unpluged the wireing.
2016-12-15 03:24:48 · answer #6 · answered by ? 4 · 0⤊ 0⤋
Look at the switches, ground may be off.
2007-03-18 16:56:19 · answer #7 · answered by bubba23111 3 · 0⤊ 0⤋