or can somebody give me a website
2007-03-18 11:31:25 · 3 answers · asked by infamy360 1 in Cars & Transportation ➔ Car Makes ➔ GMC
Remove negative battery connection and keep it away from battery. Lift truck or jack up truck in RF corner. Remove torque convertor cover. Remove both starter through bolts. There might be another bracket to the block for stabilizing and if there is, remove the one bolt for this. The starter will be loose now so support it. Gently twist and lower a little to gain access at the solenoid connections and remove both nuts for these. Slip cables off and the starter is on the ground. Clean connections including grounding area to block and reverse this to install. Good luck.
2007-03-18 11:48:10 · answer #1 · answered by Deano 7 · 0⤊ 0⤋
When you're at the auto parts store buying a starter-pick up a repair manual and read up on it!
2007-03-20 02:02:33 · answer #2 · answered by gittit 3 · 0⤊ 0⤋
go to www.gmc.com it helps a lot
2007-03-18 13:04:25 · answer #3 · answered by Shafiek A 1 · 0⤊ 0⤋