Anybody has 1999 Toyota RAV4 factory audio wiring spec?

Question

I like to replace factory cassette player with a new CD player? I need to identify wires.

Answer 1

u dont need to do this, just go buy an aftermarket wiring harness, plugs right into the factory radio harness ;) save yourself time and work smart

Answer 2

No reason to wager. in simple terms verify the valve adjustment your self. It in person-friendly words takes a couple of minutes, and all you want is a feeler gauge. The clearances are: intake, 0.008-0.011 in. (0.19-0.29mm); Exhaust, 0.012-0.016 in. (0.30-0.40mm) (i don't be conscious of if it extremely is warmth or chilly, because it relies upon, so call the broking to verify.) then you definitely opt to placed the crankshaft to TDC (proper useless center) of the timing marks on the pulley. it really is more straightforward with the plugs out, in case you've been going to regulate them besides. because the cam turns 0.5 the speed of the crank, then it really is in position for checking the valve adj on cylinder a million or 3. you'll be waiting to inform with assistance from reckoning on the camshaft. You do the single with the lobes pointing up, faraway from the valves. in truth, you are able to verify all of those which at the instantaneous are not urgent down in any respect. Then once you rotate the engine 360 tiers, you should do all something. even if, if the adj is out area of this variety, the cam followers could be bumped off and altered for adjustment, so i'd have the broking attempt this. yet frequently you do not could. it really is in person-friendly words a precaution. and also you do not could spend more advantageous than the cost of a canopy gasket to entice close for particular. To make it even more straightforward, you are able to purchase a feeler gauge it extremely is stepped at those sizes, and also you in simple terms use it as a flow/nogo gauge, the position you spot how some distance you are able to insert it (with out forcing). After reading the different comments, I definitely could function, that no they don't seem to be hydraulic, and no you gained't listen tapping even as they are free. it extremely is because it really is overhead cam, and there aren't any lifters or rocker hands, in person-friendly words follower cups.